With high positioning accuracy and leading process package, Estun Codroid helps you improve weld quality and productivity. This solution can meet the needs of small batch and diversified welding processing flexibly.
FLEXIBLEThe mobile modular fixturing cart is suitable for various scenarios.
SafeInterlocking signals between the welding machine and the robot ensure absolute safety.
VERSATILECompatible with domestic and foreign main stream welding machine brands.
CONVENIENTModular welding procedure calling, which can be divided into single-pass welding programs, multi-layer, multi-pass weld seams, and skip welding.
MULTIPLEMIG/MAG, Laser support
USER-FRIENDLYImporting professional parameters from database with one click, and the user teaches weld points only.
REAL-TIMEWelding process parameters can be adjusted in real-time to ensure excellent welding quality.
TRACEABLEKey parameters can be monitored and recorded to form a welding log.
ADJUSTABLEEasy to check the teaching path by running procedure without arc starting; support manual wire feeding, wire retraction, and gas feeding.
Providing triangular, sinusoidal, circular, and figure-eight swing patterns, allowing adjustment of swing frequency, swing amplitude, left-right dwell time, and other parameters to meet welding seam dimensions and forming requirements.
The rational operating angles and forward/backward angles can be attached to the teaching point to simplify the demonstration and ensure good weld quality and accuracy of the welding attitude.
For middle thickness plate, as the relevant points of first weld seam have been taught by manual guidance, the remaining points will be calculated according to the offset parameters, which greatly shortens the programming time, and the parameters can be saved and recalled for next operation.
Suitable for single-pass fillet welding and stitch weld seams. This process only requires the relevant points of weld seam through manual guidance, and the welding parameters will choose appropriate weld length, gap length and welding sequence, which simplifies programming logic significantly.
Welding wire positioning and laser positioning ensure the accuracy of the robot under repeated operations.
Arc tracking and laser tracking ensure that the weld does not deviate and the quality is stable
Monitor and record key parameters, establish a core database, and expert-level parameters can be called at any time
During welding, the process parameters such as current, voltage, speed, swing, and the relative position of the welding gun can be adjusted.
When a program is paused due to external interference, it can be restarted from the pause point without repeating the previous path.
When the arc does not start normally, you can start the arc by scratching it near the arc starting position along the teaching path. After the arc starts successfully, you can move to the arc starting point to officially run the program.
QINEO StarT 406
20A/15V-400A/34V
400A
350A
380V-400 V/3相
720x340x500 mm
RFL-C2000H
2000W
Continuous/Modulated
1-5000Hz
50μm
220±10%VAC、50/60Hz
440x150x718.5mm
© 2025 Copyrights codroid.ai All rights reserved.
南京埃斯顿酷卓科技有限公司 版权所有 苏ICP备2023008279号-1
Welding
Palletizing
Screwdriving
Machine tending
Glue
Vision inspection
Fluctuating force control test
